PRODUCT

ZIGBEE RADAR SENSOR

DETAIL

This product is used for energy saving in offices, hotels, shopping malls, residences, underground garages and other places. The wireless ZigBee network is formed between sensors and sensors (and the protocol converters MP-ZB-485). Usually, multiple sensors sending network commands at the same time will lead to data loss or network paralysis. The ZigBee protocol can solve the problem effectively. 
Main feature of MP-RFLS-ZB24 as following:
The sensor is powered by 24Vdc.
Radar detection range: 0-6 meters, adjustable by software.
Diameter: 96mm, Height: 45mm, Surface mounted under the ceiling.
Detection angle: 145 degrees
MP-RFLS-ZB24 supports both ZigBee protocol and MP-bus protocol.
When it detects that someone enters the area, the sensor MP-RFLS-ZB24 sends a preset light-on command to the wireless network; when it detects that there is no one in the area for a period of time (delay time), the sensor MP-RFLS-ZB24 sends a preset light-off command to the wireless network.
Delay time range: 15 seconds ~ 30 minutes.
Indicator LED:  the green indicator led is always on, and the engineer can send commands to sensor to force the indicator led to flash to identify the special device
The radar function can be enabled or stopped by network commands, and this command can be used for all radar sensors or those radar sensors with specified addresses.
MP-RFLS-ZB24 has illuminance detection function, range: 0-1000Lux, illuminance threshold can be set, When the illuminance exceeds the pre-set threshold range, MP-RFLS-ZB24 will send preset commands to the wireless network automatically.