PRODUCT

Stand Alone Mains Sensor with PIR

DETAIL

It is used to control lighting power on/off for energy-saving in office buildings, museums, commercial centers, warehouses, factories, airports and other places. 
Main feature:
230VAC power supply, and its relay output is also 230VAC, which can directly switch the lighting fixtures.
Used independently and do not need a lighting control system.
When it detects that someone enters the detected area, the detector will turn on the light immediately; when the person leaves the area, the detector will start automatic timing, and if no one enters after reaching the preset delay value, the detector will automatically turn off the light ; If someone enters again before the preset delay value is reached, the timer value of the detector will be automatically reset to zero, and the countdown will be restarted automatically after the person leaves the area.
The delay time value of the detector can be set manually on the detector. (The delay range of MP-PIRS and MP-PIRL is 10 seconds to 40 minutes; the delay range of MP-PIR220 is 10 seconds to 8 minutes).
Detection range: MP-PIRS and MP-PIR220 have a detection angle of 360 degrees and can detect a circular area with a diameter of 5 meters (when the detector is installed at a height of 2.4 meters);
The detection angle of MP-PIRL is 6 degrees, the strong detection area is within 10 meters, and the weak detection area is 10-25 meters (installation height: between 2.2 meters and 3 meters).
The detector has the function of illuminance detection. When the illuminance value of the surface to be detected exceeds the set value (the trigger value of the illuminance can be manually selected on the detector), the detector will automatically cut off the relay output; the illuminance detection range is 10-1000Lux (where MP-PIR220 can detect 10-2000Lux); in places where the light detection function is not required (places without sunlight), the light detection function can be manually canceled on the detector
Dimensions: MP-PIRS diameter 75mm, height 78mm;
MP-PIRL has a length of 150mm and a width of 70mm;
The diameter of MP-PIR220 is 63.5mm, the height is 25mm; the diameter of the ceiling opening is 48mm
Voltage: 230VAC, energy consumption is less than 0.5 watts, relay switching load capacity: 1-5A
Weight: 0.5-1Kg, ceiling or ceiling embedded installation