PRODUCT

Network Sensor with PIR MP-PIRBUS

DETAIL

Lighting energy-saving control for office buildings, museums, commercial centers, warehouses, factories, airports, etc. 
MP-PIRBUS automatically detects whether there is human activity in the area in real time, and automatically sends corresponding scene control commands to the MP network bus
Main feature:
The detector is small in size, powered by the network, has the function of network bus communication, and the wiring is very simple
The detector has a unique network address that can be manually set, which can precisely control a lamp or a group of lamps in a designated area
When it detects that someone enters the detected area, the detector MP-PIRBUS will automatically send a scene control command to the MP network bus (usually turn on the light or brighten); when the person in the area leaves, the detector starts to automatically Timing, if no one enters after reaching the preset delay value, another scene control command will be issued (usually turn off the lights or dim); if someone enters before the preset delay value is reached, the detector's The timing value is automatically reset to zero, and the countdown will be restarted automatically after the person leaves the area.
The delay time value of the detector (range: 0-65534 seconds) can be flexibly set through the MP debugging software LightWorld.
Detection range: 360 degrees, a circular area with a diameter of 5 to 8 meters (when the detector is installed at a height of 2.4 meters). 
The network-type motion detector MP-PIRBUS can be remotely locked/unlocked through the network via computer/touch screen/clock module/control plate and other intelligent devices (usually, the MP intelligent system automatically locks/cancels the motion detection function during the daytime, and the MP intelligent system automatically unlocks/enables the motion detection function during the night time period automatically).
With the MP debugging software LightWorld, you can see the current human presence/absence status of each detection area corresponding to the network type motion detectors MP-PIRBUS.
Dimensions: 77mm diameter, 23mm thickness
Voltage: 12VDC, can be powered by network cable, energy consumption is less than 0.25 watts
Weight: 0.2Kg, Ceiling surface-mounted.